
Good choices begin with useful information and a little inspiration.
A well-made printed t-shirt or hoodie can last for years, but how you wash and dry it makes a big difference. Heat, harsh detergents and rough handling are the main reasons prints crack, colors fade and cotton shrinks.
The good news is that caring for printed clothing takes almost no extra effort. These habits will keep your favorite pieces looking new for much longer.
Before the first wash
Always check the care label first, because some fabrics have specific needs. Wash dark and bright colors separately for the first few washes in case of any excess dye.
Washing: the golden rules
- Turn the garment inside out. This protects the print from rubbing against other clothes and the drum of the machine.
- Use cold water, around 30 °C (86 °F) or below. Hot water speeds up fading and can shrink cotton.
- Choose a gentle cycle, especially for heavier items like hoodies.
- Use a mild liquid detergent. Some powder detergents can be abrasive.
- Never use bleach on printed garments.
- Skip fabric softener, which can leave a film on the print over time.
- Do not overload the machine, so clothes can move freely.
Drying without damage
Heat is the biggest enemy of printed clothing.
- Hang dry or lay flat whenever possible. Lay heavier hoodies flat so they keep their shape.
- If you use a dryer, choose the lowest heat setting and remove items while they are still slightly damp.
- Avoid drying printed items in strong direct sunlight for long periods, which can fade colors.
Ironing
- Iron inside out on a low to medium setting.
- Never iron directly on a printed design.
- For stubborn wrinkles, place a thin cloth between the iron and the fabric, or use a steamer instead.
Caring for hoodies
Hoodies are heavier and more structured than t-shirts, so a little extra care pays off.
- Close zippers and empty pockets before washing.
- Wash with similar fabrics, not with towels or jeans, which can cause pilling.
- Lay flat to dry so the cuffs and hem do not stretch.
- To remove pilling, use a fabric shaver gently, and never on the print itself.
Caring for all-over printed items
Items made with sublimation, such as swim trunks, carry the design inside the fibers, so the print itself will not crack or peel. Rinse swimwear in cool fresh water after the beach or pool to remove salt and chlorine, then let it dry in the shade.
Pillow covers should be washed inside out in cold water and air dried, with the insert removed first.
Storage
- Fold t-shirts and hoodies rather than hanging them for long periods, which can stretch the shoulders.
- Store clothes clean and fully dry to prevent odors and mildew.
- Avoid folding sharply across the same line of a print every time.
Quick care checklist
- Turn inside out
- Wash in cold water
- Use a gentle cycle and mild detergent
- No bleach and no fabric softener
- Hang dry or tumble dry on low
- Never iron directly on the print
These habits take seconds and can add years to your clothing. If you ever receive an item with a print defect, contact us within 30 days of delivery with a photo, and we will make it right.



